Thunderbeast

22S-1 Rimfire Suppressor

22s

The model 22S-1 is a thread-attach suppressor for rifles and pistols chambered in .22 rimfire. At only 4.9 inches in length by 1.0″ in diameter, it provides good sound suppression in a very small package. It is ideal for suppressed .22 pistols or compact rifles.

Titanium construction provides strength and durability over aluminum rimfire suppressors. Report is drastically reduced, and almost completely abated when using subsonic ammunition. Perfect for pest control or just plinking. The suppressor is sealed and requires minimal maintenance.

Special Features

100% titanium construction
Magnum rated
Rock-Solid POI Repeatability

Specifications

Caliber .22 LR (.22 WMR and .17 HMR OK)
Material Titanium
Length 4.9 inches.
Diameter 1.0 inches.
Weight 3.2 ounces
Threads 1/2-28 standard
Finish Black DuraCoat. OD Green and FDE available
22L-1 Rim Fire Suppressor
22l and 22sThe model 22L-1 is a thread-attach suppressor for rifles and pistols chambered in .22 rimfire. The “long” model 22L-1 is 6.2 inches long, or approx 1.3″ longer than the model 22S-1, and provides increased sound suppression at the expense of a larger package. It is the ideal solution for .22 Magnum (WMR).Titanium construction provides strength and durability over aluminum rimfire suppressors. Report is drastically reduced, and almost completely abated when using subsonic ammunition. Perfect for pest control or just plinking. The suppressor is sealed and requires no maintenance.

Special Features

100% titanium construction
Magnum rated
Rock-Solid POI Repeatability

Specifications

Caliber .22 LR (.22 WMR and .17 HMR OK)
Material Titanium
Length 6.2 (6 3/16) inches.
Diameter 1.0 inches.
Weight 4.1 ounces
Threads 1/2-28 standard
Finish Black; OD Green or FDE DuraCoat available
223A 5.56 Rifle Suppressor
223aThe model 223A is our full-auto suppressor for 5.56 mm NATO assault rifles. It is designed for extreme durability and high heat loads from full-auto and burst firing schedules. The 223A is ideal for short-barrelled rifle (“SBR”) format fighting carbines and M4/M16 pattern rifles, as well as AR-15’s that will be used with a high rate of fire.The 223A was developed specifically for the 7.5-inch Sabre Defence Industries Stealth SBR.The 223A is made of 316 stainless steel and inconel and features a full-welded baffle core for durability. It has a length of 6.8 inches, 0.4 less than the 223P, to keep over-all length of the carbine relatively short. Muzzle blast concussion is eliminated and the recoil impulse is reduced and smoothed over time. The 223A improves the accuracy of most rifles. It is sealed and requires no maintenance.The 223A is ideal for fighting carbines including full-auto applications.

Special Features

Full-auto rated down to 7″ SBR
Hybrid stainless/inconel construction
Extreme durability
Helical Baffle Technology
Low back-pressure design

Specifications

Caliber 223 caliber, 5.56 mm NATO
Material 316 Stainless Steel and Inconel
Length 6.8 inches.
Diameter 1.5 inches.
Weight 22.7 ounces
Threads 1/2-28 (US standard)
Finish Black; OD Green or FDE DuraCoat available
Use full-auto rated, 7-inch barrel OK.
223P-2 5.56 Rifle Suppressor
223P

The model 223P-2 is a thread-attach suppressor for sporting rifles in .223 Remington and 5.56 mm NATO which yields competitive sound suppression levels in a very light weight format. The 223P-2 was designed primarily for semi-auto use on AR-15s and use on bolt-action .223 rifles. The direct thread-on attachment is best for rifles that will be shot suppressed most of the time.

The model 223P-2 replaced the 223P-1 in May 2014. It is an incremental revision on that design which improves strength, durability, and suppression.

The 223P-2 is made of titanium and stainless steel to minimize weight added to the weapon while maintaining strength and durability required for sustained semi-auto fire. Muzzle blast concussion is eliminated. The recoil impulse is reduced and smoothed out over time. Communication with your spotter is aided and the need for hearing protection is reduced. The 223P-2 improves the accuracy of most rifles. The suppressor is sealed and requires no maintenance.

The 223P-2 is ideal for: sporting and varmint use on semi-auto and bolt action rifles in .223 Remington and 5.56 mm NATO.

SPECIAL FEATURES

Hybrid titanium/stainless construction
Helical Baffle Technology
Low back pressure design
Rock-Solid POI Repeatability

APPLICATION NOTES

This suppressor is inteded for sporting applications and barrel lengths not shorter than 14.5″. For shorter SBR use or full-auto, the223A is the correct application. .22-250 OK with barrel lengths of 22″ or longer. For questions about a particular rifle/load combination please contact us.

Specifications

Caliber .223 caliber, 5.56 mm NATO
Material Titanium and Stainless Steel
Length 7.2 inches.
Diameter 1.5 inches.
Weight 14.4 ounces
Threads 1/2-28 (US standard)
Finish Black CeraKote; OD Green and FDE available
Use semi-auto use; not full-auto rated.
30P-1 30 Caliber Rifle Suppressor
30P-1The model 30P-1 is our flagship long-range precision rifle suppressor. It offers best-in-class sound suppression levels in a very light weight format, and is built with accuracy as its first priority.The 30P-1 was designed around .308 for maximum flexibility and is rated up to .300 Winchester Magnum, but it’s the ideal suppressor for the most competitive mid-sized cartridges for long-range shooting such as .243 Winchester .260 Remington, 6.5 Creedmoor, 6.5×47 Lapua, 6.5-284 Norma, and 7mm Remington Magnum & WSM.The 30P-1 has racked up impressive results at long-range field shooting events in the Rocky Mountain region, including the Blue Steel Ranch Steel Safari and the NRA Whittington Center Sporting Rifle Match. Many long-range shooters prefer shooting suppressed because the muzzle blast and concussion is eliminated, while the recoil impulse is reduced and smoothed out over time. The net result is that the rifle is easier to shoot and it’s easier to make hits. Communication with your spotter is easier because the need for hearing protection is reduced.The 30P-1 is constructed of titanium with a fully-welded baffle core. This material and construction provides a great strength to weight ratio. It can take whatever your precision rifle can dish out.The 30P-1 is ideal for: long-range practical competition shooters; varminters; predator hunters; precision tactical shooters.
Also available in a 7 inch and 5 inch model.

Special Features

100% titanium construction
360-degree fully-welded baffle core
Helical Baffle Technology
Magnum rated
Rock-Solid POI Repeatability

Specifications

Caliber .30 caliber, up to .300 Winchester Magnum
Material Titanium
Length 9 inches (30P-1), 7 inches (30PS), 5 inches (30PSS)
Diameter 1.5 inches.
Weight 16 ounces (varies with thread pattern)
Threads 5/8-24 standard, also M18x1.5, M18x1.0
Finish Black CeraKote; OD Green or FDE available
Use Precision/Long-range rifle, bolt or semi-auto

30CB 30 Caliber Rifle Suppressor Series

Brake-attach .30 caliber suppressor

30BA

Compact Brake-attach .30 caliber suppressor

The model 30CB is the new “Compact Brake”-attach version of our flagship long-range precision rifle suppressor. This model replaces the 30BA. It shares the same competition-proven baffle stack as the 30BA and 30P-1 (with a few new optimizations), but we’ve designed a new brake that is smaller and more efficient than the old one.

TBAC CBWhen used alone, the new “CB” brake is approx 30-40% more effective at recoil reduction than the old 30BA brake. The new brake is proportioned correctly for .223 and .30 caliber rifles, but it provides a suppressor mounting surface just as solid as the old 30BA series.

The way to interpret the model number for the 30CB9 is: .30 caliber,COMPACT BRAKE, 9-inch long (full size)

The 30CBx series replaces the 30BA/BAS series as of May 2014. We will continue to sell 30BA series brakes and suppressors to existing “BA”-series customers if requested.

The 30CB9 offers best-in-class sound suppression levels in a very light weight format, and is built with accuracy as its first priority. The 30CB9 is designed to mount over our new compact muzzle brake. It is particularly suited to applications where the rifle will be shot suppressed and unsuppressed, and a brake is desired when shooting without the suppressor.

The “CB” series suppressors was designed to mount over our new compact brake and provide the same repeatability as our direct thread attach suppressors, like the 30P-1. The 30CB9 features a conical shoulder for rock solid POI repeatability and to make sure it never comes loose.

The 30CB9 was designed around .308 for maximum flexibility and is rated up to .300 Winchester Magnum, but it’s the ideal suppressor for the most competitive mid-sized cartridges for long-range shooting such as .243 Winchester .260 Remington, 6.5 Creedmoor, 6.5×47 Lapua, 6.5-284 Norma, and 7mm Remington Magnum & WSM.

The 30CB9 uses the baffle stack of the 30P-1, which has racked up impressive results at long-range field shooting events in the Rocky Mountain region, including the Blue Steel Ranch Steel Safari and the NRA Whittington Center Sporting Rifle Match. Many long-range shooters prefer shooting suppressed because the muzzle blast and concussion is eliminated, while the recoil impulse is reduced and smoothed out over time. The net result is that the rifle is easier to shoot and it’s easier to make hits. Communication with your spotter is easier because the need for hearing protection is reduced.

The 30CB9 is constructed of titanium with a fully-welded baffle core. This material and construction provides a great strength to weight ratio. It can take whatever your precision rifle can dish out.

The 30CB9 is ideal for: long-range practical competition shooters; varminters; predator hunters; precision tactical shooters.

SPECIAL FEATURES

New Compact Brake for .223 up to .30 caliber rifles
Brake-in-suppressor design
Conical shoulder surface
100% titanium construction
360-degree fully-welded baffle core
Helical Baffle Technology
Magnum rated
Rock-Solid POI Repeatability

APPLICATION NOTES

This suppressor is strength-rated for 6.5-284, 7mm Rem Mag, 7mm WSM, .300 Win Mag. Not recommended for use with magnum cartridges with barrel lengths shorter than 22 inches. 7 mm Magnums OK not to exceed 72 grains powder. .30 cal Magnums OK not to exceed 82 grains powder. For questions about a particular rifle/load combination please contact us.

Specifications

Caliber .30 caliber, up to .300 Winchester Magnum
Material Titanium
Brake Material Hardened stainless steel
Length 9 inches, 7 inches, 5 inches
Diameter 1.5 inches.
Weight 15.9 ounces
Brake Threads 1/2-28*, 5/8-24, 9/16-24, 3/4-20, 3/4-24, 3/4-28, M18x1.0, M18x1.5 * Note: The 1/2-28 30BA brake has a .223 caliber aperture!
Finish Black CeraKote; OD Green or FDE available
Use Precision/Long-range rifle, bolt or semi-auto

Leave a Reply

Your email address will not be published. Required fields are marked *